На странице «EPP BAPE Keyboard» есть 4 опции:
Я нажал на 4-ю, чтобы удалить все ключи, но, кажется сделать это невозможно:
Есть ли какая либо связь между первой опцией (Security Module Load File) и сменой прошивки? Есть ли у вас какой- либо файл? Наша проблема в том, что мы не можем принять новый ключ.
Security Module Load File
Модератор: central
- Dan
- Нач. отдела
- Сообщения: 2817
- Зарегистрирован: 29 окт 2010, 00:20
- Благодарил (а): 44 раза
- Поблагодарили: 96 раз
Re: Security Module Load File
Я думаю нет никакой связи между прошивкой и заменой криптоключей.
У вас в каком режиме вбиваются ключи?- 4.Restricted Mode?
Попробуйте поменять значение с INTL на LGCY, Restart, затем обратно+ рестарт.
(7.Diagnostics- 8.Self Service Configuration > 3. Set Device Configuration)
У вас в каком режиме вбиваются ключи?- 4.Restricted Mode?
Попробуйте поменять значение с INTL на LGCY, Restart, затем обратно+ рестарт.
(7.Diagnostics- 8.Self Service Configuration > 3. Set Device Configuration)
Scientists study the world as it is, engineers create the world that never has been
-
- Местный
- Сообщения: 61
- Зарегистрирован: 20 май 2012, 23:22
- Авто: Pride
- Благодарил (а): 4 раза
- Поблагодарили: 1 раз
- Контактная информация:
Re: Security Module Load File
I have a small problem with APTRA™ XFS and I hope you can help me with it. I want to connect to devices and send commands through APTRA™ XFS Layer.
All devices function properly. The only problem is that EPP operates in the keypad mode and even FDK works. But when we want to initialize it in the Encryption mode, there is KEYNOTFOUND error.
WFS_ERR_PIN_KEYNOTFOUND (-400)
Have you written something similar to this code on APTRA™ XFS Layer, or do you have a template of a code we can use in our own code? I do not mean a complete application, but just parts of a code which works with APTRA™ XFS Layer, or even a message format we should send to APTRA™ XFS Layer.
All devices function properly. The only problem is that EPP operates in the keypad mode and even FDK works. But when we want to initialize it in the Encryption mode, there is KEYNOTFOUND error.
WFS_ERR_PIN_KEYNOTFOUND (-400)
Have you written something similar to this code on APTRA™ XFS Layer, or do you have a template of a code we can use in our own code? I do not mean a complete application, but just parts of a code which works with APTRA™ XFS Layer, or even a message format we should send to APTRA™ XFS Layer.
- Dan
- Нач. отдела
- Сообщения: 2817
- Зарегистрирован: 29 окт 2010, 00:20
- Благодарил (а): 44 раза
- Поблагодарили: 96 раз
Re: Security Module Load File
I don't understand nothing....
Do you have a ATM or you have a test machine?
I'm sorry, I can't help you with Aptra developing.
Do you have a ATM or you have a test machine?
Where did you seen that?ashoori писал(а):EPP operates in the keypad mode
I'm not a developer, i'm support engineer.ashoori писал(а):Have you written something similar to this code on APTRA™ XFS Layer
I'm sorry, I can't help you with Aptra developing.
Scientists study the world as it is, engineers create the world that never has been
-
- Специалист
- Сообщения: 272
- Зарегистрирован: 30 сен 2011, 15:25
- Благодарил (а): 3 раза
- Поблагодарили: 15 раз
Re: Security Module Load File
You must have at least TMK (terninal master key) entered in EPP. If there are no KVV values displayed in [6-Access Menu; 1-Disp Access] then no keys has been entered. Please read AANDC Supervisor manual.ashoori писал(а):when we want to initialize it in the Encryption mode, there is KEYNOTFOUND error.
WFS_ERR_PIN_KEYNOTFOUND (-400)