Описание пунктов меню supervisor в APTRA

[indigod2]

У кого нибудь есть готовая наглядная схема всех пунктов Супервизора и Аптры? а еще отличней было б с комментарием русским что там что означает)

[f119b]

Ну для начала - есть аптра под ос/2, а есть - под виндой.
Последние версии апртры могут "разговаривать" по русски (правда довольно коряво- я предпочитаю переводит таких обратно в англицкий язык).
В конкрентом банкомате в диагностике пункты меню (вернее номера пунктов) могут быть иными, но названия те-же
На ГБНА нет.
Почитай вот это(дока в Ворде):
Может и не очень наглядно, но кое-где описание на русском есть.

[f119b]

В раре пдфка на 4 метра руководство на англицком языке..
P.S. - есть же раздел конкретно по АПТРе - хто-нить переместите тему!

[indigod2]

спасиб)))

[andy]

А вот еще "ATM Service Aid.pdf" август 2006 года - 2,5 метра случайно выкачал - довольно много инфы, в том числе и по аптре...
Содержание:

Код: Выделить всё

Table of Contents
56XX ATM Service Aids Table of Contents
CHAPTER 1 - ATM MODEL INFORMATION ......... 1.1
HARDWARE MODULE LOCATIONS................... 1.1
5670 ATM.............................................. 1.1
5685 ATM.............................................. 1.2
5675 ATM.............................................. 1.3
5688 ATM.............................................. 1.4
PersonaS 74 Front Access ....................... ... 1.5
PersonaS 74 Rear Access............................  1.6
PersonaS 75 Front Access ..........................  1.7
PersonaS 75 Rear Access............................  1.8
PersonaS 84 ........................................... 1.9
PersonaS 85 ............................................1.10
PersonaS 88 ............................................1.11
PersonaS 86 ........................................... 1.12
PersonaS 90 ........................................... 1.13
PERSONAS 90e......................................... 1.14
OPENING THE FACIA ON PERSONAS 75 VESTIBULE ATM. 1.15
OPENING THE FACIA ON PERSONAS 88 DRIVE UP TTW ATM. 1.19
CHAPTER 2 - ATM SUPERVISOR MENUS......................... 2.1
NDC+ SUPERVISOR MENUS ....................................... 2.2
NDC+ UTILITIES MENU - SAMPLE TREE ......................... 2.3
HEALTH ERRORS.................................................. 2.4
State Of Health 1 Errors ......................................... 2.4
State Of Health 2 Errors ......................................... 2.5
State Of Health 3 Errors ......................................... 2.5
APTRA ADVANCE NDC SUPERVISOR’S MENU STRUCTURE..... 2.6
APTRA EDGE SUPERVISOR’S MENU STRUCTURE- U.S. ........ 2.7
SYSTEM APPLICATION FOR WINDOWS – EXAMPLE MENUS .... 2.8

CHAPTER 3 - DIAGNOSTICS GENERAL INFORMATION ......... 3.1
CUSTOMER-SPECIFIC PROCEDURES FOR ACCESSING NCR DIAGNOSTICS (SYSTEM
APPLICATION) ON NT MACHINES. ............................... 3.1
Bank of America ................................................... 3.1
Chase Bank......................................................... 3.1
Fidelity Investments............................................... 3.1
Fleet Bank.......................................................... 3.2
VCOM 7-11 ..................................... ................... 3.2
Wells Fargo ........................................................ 3.2
CLEARING NVRAM ................................................. 3.3
ERROR REPORTING – TCM CORES AND ELSB.................... 3.4
ERROR REPORTING – STANDARD, NLX, AND ATX CORES...... 3.6
LEVEL 1 DIAGNOSTIC TEST RESULTS...................... ..... 3.7
M-Status............................................................ 3.7
M-Data ............................................................. 3.7
T-Data .........................................................  ... 3.8
HEX CONVERSION CHART ........................................ 3.9
INSPECTING AND HARDCOPYING THE EJ LOG FILE............ 3.10
EJ HELP SCREEN .................................................. 3.11
EJ TIME SEARCH OPTION ........................................ 3.12
COPYING SECTIONS OF THE EJ LOG ........................... 3.13
CHAPTER 4 - ATM CONFIGURATION PROCEDURES............ 4.1
56XX/PERSONAS ATM CONFIGURATION PRINTOUT – NDC+.. 4.1
CHAPTER 5 - POWER SUPPLIES & POWER DISTRIBUTION.... 5.1
POWER SUPPLY TEST CONNECTOR............................. 5.1
POWER SUPPLY STATE OF HEALTH LED....................... 5.1
AC DISTRIBUTION – ASTEC AND SYSTEM POWER SUPPLY ..  5.2
AC DISTRIBUTION – SLIMLINE POWER SUPPLY ............... 5.3
AC DISTRIBUTION – SWITCH MODE POWER SUPPLY.......... 5.4
AC WIRING CONVENTIONS....................................... 5.5
DC DISTRIBUTION HARNESSES................................... 5.5
POWER SUBSYSTEMS REFERENCE MATERIAL................... 5.6
POWER SUPPLY PART NUMBERS ................................ 5.6

CHAPTER 6 - ATM PC CORES...................................... 6.1
TERMINAL CONTROL MODULE.................................... 6.1
TCM ELECTRONICS CORE TRAY.................................. 6.2
TCM CORE REFERENCES........................................... 6.3
TCM CORE PART NUMBERS ....................................... 6.3
Original TCM Core PNs ........................................... 6.3
HI3 TCM Core PNs................................................. 6.4
ASB Core PNs ...................................................... 6.4
STANDARD (LPX) PC CORE........................................ 6.5
STANDARD (LPX) PC CORE ELECTRONICS CORE TRAY ........ 6.6
STANDARD (LPX) PC CORE REFERENCES.........................6.7
STANDARD (LPX) PC CORE PART NUMBERS .................... 6.7
Parts used with the ELSB board .................................. 6.7
ELSB/LPX PENTIUM MEMORY SIMMs ............................ 6.8
Parts used with Pentium Motherboards......................... 6.9
Standard (LPX) PC Core SSPB Kits used with Pentium Motherboards. 6.9
NLX CORE WITH A PELE MOTHERBOARD........................ 6.10
NLX CORE WITH A PELE II MOTHERBOARD...................... 6.11
NLX CORE WITH A PHANTOM MOTHERBOARD................. 6.12
(PENTIUM II OR PENTIUM III)..................................... 6.12
NLX ELECTRONICS CORE TRAY .................................. 6.13
NLX CORE - PELE II MOTHERBOARD SWITCH SETTINGS...... 6.14
Switchpack 1....................................................... 6.14
Default Position in BOLD ......................................... 6.15
JUMPER SETTINGS: Default position in BOLD.................. 6.15
NLX PC CORE REFERENCES ...................................... 6.16
NLX PC CORE PART NUMBERS ................................... 6.16
ATX (PIVAT) COMPACT CORE WITH A ITOX MOTHERBOARD. 6.19
ATX PC CORE REFERENCES....................................... 6.20
ATX (PIVAT) PC CORE PART NUMBERS .......................... 6.20
DISK DRIVE REFERENCE MATERIALS ............................. 6.21
DISK DRIVE PART NUMBERS ....................................... 6.21
ATM DISKETTES .................................................... 6.22
DISK DRIVE ERROR MESSAGES.....................................6.22

CHAPTER 7 - SDC SUBSYSTEM ..................................... 7.1
NVRAM CLEAR ....................................................... 7.2
MINIMUM HARDWARE CONFIGURATION .......................... 7.2
MISSING SDC DEVICE................................................ 7.3
MISSING ENCRYPTOR/KEYBOARD.................................. 7.3
STREAMING SDC DEVICE ........................................... 7.3
“DEAD” ATM......................................................... 7.4
SDC DEVICE BEHAVIOR ON APTRA ATM’S ........................ 7.4
SDC DEVICE ADDRESS (LINK NODE) TABLE ....................... 7.5
SDC SUBSYSTEM REFERENCE MATERIAL.......................... 7.6
SDC PART NUMBERS................................................ 7.6
CHAPTER 8 - VIDEO AND GRAPHICS.............................. 8.1
VIDEO AND GRAPHICS REFERENCE MATERIAL................... 8.1
VIDEO AND GRAPHICS PART NUMBERS........................... 8.2
VIDEO AND GRAPHICS TROUBLESHOOTING TIPS ............... 8.2
CHAPTER 9 - ENCRYPTION......................................... 9.1
VERSIONS ........................................................... 9.1
BAPE ................................................................. 9.1
HI-BAPE.............................................................. 9.1
EKC .................................................................. 9.1
Encrypting Pin Pad (EPP) .......................................... 9.1
ENCRYPTION KEYS POLICY ........................................ 9.2
ENCRYPTION KEYS POLICY ........................................ 9.3
ENCRYPTOR REFERENCE MATERIAL ..............................9.4
ENCRYPTOR PART NUMBERS.......................................9.4
CHAPTER 10 - INPUT DEVICES ....................................10.1
REFERENCE MATERIAL............................................. 10.1
EPP PART NUMBERS................................................ 10.2
OTHER KEYBOARD PART NUMBERS............................... 10.2
TROUBLESHOOTING TIPS ......................................... 10.3
“No Keyboards Attached” ......................................... 10.3

CHAPTER 11 - ELECTRONICS AND COMMUNICATIONS......... 11.1
OS/2 TCP/IP COMMUNICATION DIAGNOSTIC TESTING........ 11.1
Additional Information & Tips.................................... 11.3
TCP/IP TEST – PING ATM VIA LAPTOP........................... 11.4
A SUCCESSFUL TEST PROVES THE LAPTOP CAN LOCATE THE NIC AT THE ATM
AND THE HOST SHOULD BE ABLE TO DO AS WELL IF THERE IS CONNECTIVITY. . 11.4
TCP/IP TEST – PING NETWORK DEVICE VIA LAPTOP .......... 11.5
SAMPLE OS/2 TCP/IP CONFIGURATION PRINTOUT............ 11.6
HEX TO DECIMAL CONVERSION TABLE ......................... 11.8
DIAL UP TROUBLESHOOTING GUIDE ............................ 11.9
Overview .......................................................... 11.9
Dialup Problems .................................................. 11.10
Dialup ATM Test Tool (DATT) ................................... 11.10
Troubleshooting Check List ......................................11.11
Dialup Troubleshooting Flow .....................................11.13
Useful Dialup Troubleshooting Tools ............................ 11.14
PART NUMBERS FOR US ROBOTICS & WELLS MODEMS ....... 11.14
MODEM STRAPPING ............................................... 11.15
56/58XX US Robotics Internal Modem ...........................11.15
56/58XX US Robotics External Modem ...........................11.15
5305/5303 US Robotics Internal Modem ........................ 11.15
5305/5303 Wells Internal Modem ................................ 11.15
MODEM INIT STRINGS ............................................. 11.15
US ROBOTICS modem ............................................. 11.15
WELLS modem...................................................... 11.15
REFERENCE MATERIAL............................................. 11.16
COMMUNICATIONS PART NUMBERS............................... 11.16
CHAPTER 12 - EXTERNAL DEVICE INTERFACES.................. 12.1
NCR ALARM SYSTEMS ..............................................12.1
ALARM SENSORS / SIGNALS .......................................12.1
ATM ALARMS TESTER ..............................................12.2
INTRODUCTION......................................................12.2
LEDs...................................................................12.3
56XX ATM +12 VOLT TEST CABLE .................................12.4
REFERENCE MATERIAL..............................................12.6
PART NUMBERS ......................................................12.6

CHAPTER 13 - MAGNETIC CARD READERS.........................13.1
REFERENCE MATERIAL...............................................13.1
PART NUMBERS .......................................................13.2
CARD READER TROUBLESHOOTING TIPS .......................... 13.2
CHAPTER 14 - ENVELOPE DEPOSITORY AND DISPENSER ......... 14.1
56XX ENVELOPE DISPENSER LOADING INSTRUCTIONS............. 14.1
REFERENCE MATERIALS ............................................. 14.2
DEPOSITORY TROUBLESHOOTING TIPS............................. 14.3
REPLENISHMENT ITEMS............................................... 14.3
PART NUMBERS......................................................... 14.4
P86 DEPOSITORY....................................................... 14.5
CPM2 AND CPM3 PARTS............................................... 14.5
CHAPTER 15 - CURRENCY DISPENSER .............................. 15.1
DISTINGUISHING DISPENSERS ........................................ 15.1
56XX DISPENSERS PRE I/E AND I/E INTERCHANGEABILITY ....... 15.5
PRE-IE AND IE DISPENSER PARTS .................................... 15.5
IE DISPENSER ........................................................... 15.5
ENHANCED DISPENSERS INTERCHANGEABILITY .................... 15.8
ENHANCED DISPENSER PARTS......................................... 15.8
5870 “SPRAY DISPENSER” PARTS..................................... 15.10
5305 RS232 “SPRAY DISPENSER’ PARTS.............................. 15.11
ARIA PICK MODULE PART NUMBERS .................................. 15.11
5886 DISPENSER PART NUMBERS ..................................... 15.12
PICK MODULE GEARS ................................................... 15.13
DISPENSER REPLENISHMENT ITEMS.................................... 15.14
SINGULARITY AND SIZE VALUES FOR U. S. CURRENCY............... 15.14
SINGULARITY AND SIZE VALUES FOR CANADIAN CURRENCY....... 15.15
CASSETTE MAGNET CONFIGURATION ................................. 15.16
WIDE CASSETTES .......................................................... 15.16

CHAPTER 15 - CURRENCY DISPENSER (CONTINUED)
SYS APP – BILL CONFIGURATION AND CASH ENABLE................... 15.17
SETTING BILL PARAMETERS.............................................. 15.17
DISPENSING CASH OFFLINE (CASH ENABLE) ............................ 15.17
REFERENCE MATERIALS ................................................... 15.18
DISPENSER TROUBLESHOOTING TIPS.................................... 15.19
False “Dispenser Fatal” dispatches...................................... 15.19
Currency Dispenser Common Faults...................................... 15.20
CHAPTER 16 - PRINTERS................................................... 16.1
BLACK MARK ADJUSTMENT FOR TSE (TEC) THERMAL RECEIPT PRINTER .. 16.1
80 COLUMN THERMAL PRINTER BLACK MARK CALIBRATION.......... 16.2
REFERENCE MATERIALS.................................................... 16.3
REPLENISHMENT ITEMS.................................................... 16.3
PART NUMBERS ............................................................. 16.3
PRINTER PART NUMBERS (CONTINUED) ................................... 16.4
40 COLUMN PRINTERS TROUBLESHOOTING TIPS......................... 16.5
40 COLUMN AXIOHM THERMAL PRINTERS TROUBLESHOOTING TIPS ... 16.6
40 COLUMN TEC (TSE) THERMAL PRINTER TROUBLESHOOTING TIPS .. 16.7
80 COLUMN THERMAL PRINTER TROUBLESHOOTING TIPS..............16.8
CHAPTER 17 - MISCELLANEOUS PART NUMBERS ........................ 17.1
PERSONAS 5890 E PARTS................................................... 17.1
5305 MCD2 PART NUMBERS................................................ 17.1
REFERENCE MATERIALS.................................................... 17.2
ATM DISKETTES ............................................................ 17.2
TOOLS AND TEST EQUIPMENT ............................................ 17.2
DISK DRIVES ................................................................. 17.4
CABLES & HARNESSES...................................................... 17.5
50XX/56XX REPLACEMENT KEYS .......................................... 17.6
NCR GRAY PAINTS........................................................... 17.6
MISCELLANEOUS CABINET PARTS .......................................... 17.7

[indigod2]

А вот еще "ATM Service Aid.pdf" август 2006 года - 2,5 метра случайно выкачал - довольно много инфы, в том числе и по аптре...

Благодарю! Любопытный файл, много полезного есть

[Airat_Kzn]

Вот тут вроде проскакивало APTRA Advance NDC : Supervisor's Manual.
Очень полное руководство - около 300 страниц.

Если не найдёте - пишите, выложу.

PS - Возможно, это то же самое, что выложил f119b - по такому названию файла не понятно - что там именно внутри.

[alpavel]

Здравствуйте. Я работаю совсем не давно, и с английским языком не дружу совсем Поэтому у меня возникает проблема с NCR 6676 я не понимаю не чего в супервизоре, и не могу сбрасывать ошибки. Помогите мне! Есть ли у кого ни буть инструкция по работе с супервизером (желательно на английском и русском языке)

[f119b]

ATM Service Aid - глава 2:

Спойлер

CHAPTER 2 - ATM SUPERVISOR MENUS................................................ 2.1
NDC+ SUPERVISOR MENUS .............................................................................. 2.2
NDC+ UTILITIES MENU - SAMPLE TREE ........................................................... 2.3
HEALTH ERRORS............................................................................................... 2.4
State Of Health 1 Errors ............................................................................... 2.4
State Of Health 2 Errors ............................................................................... 2.5
State Of Health 3 Errors ............................................................................... 2.5
APTRA ADVANCE NDC SUPERVISOR’S MENU STRUCTURE.............................. 2.6
APTRA EDGE SUPERVISOR’S MENU STRUCTURE- U.S. ....................................... 2.7
SYSTEM APPLICATION FOR WINDOWS – EXAMPLE MENUS .................. 2.8

APTRA™ Advance NDC eference Manual B006-6180-G000 October 2004 подробненько так
APTRATM Advance NDC Supervisor’s Guide B006-6062-J000 Issue 2 February 2008 посвежее.
Все это где-то на форуме есть (если хорошенько поискать).
Правда на иноземном языке..
На русском вот такая выжимка - шпаргалка:

[alpavel]

Огромное Спасибо

[btb]

как зайти на ncr в режим "супервизора", удалено?

[f119b]

btb
На сколько я понимаю, в ПО NCR нет SOP но есть APTRA
Или я отстал от жизни в своей деревне?
Возможно Вы имели ввиду: как перейти в режим "супервизора" и что делать дальше?